The design of Multi-effect wastewater evaporation must meet the relevant requirements. The evaporator is generally made of metal, so the PH value is required. The PH value of the processed material needs to be selected according to the material in the heater and the place in contact with the material, and the material with good corrosion resistance is selected. The material PH value is too high or too low will affect the stable operation of the evaporator.

1. The product that the equipment needs to produce or evaporate needs to be a product that will not burst at high temperatures. Generally, the burst product will affect the equipment and reduce the service life of the Multi-effect wastewater evaporation equipment.
2. Multi-effect wastewater evaporation is an industrial product that has passed inspection. Only the industrial product that has passed the inspection can undergo evaporation. The industrial product that has not been inspected may have many problems. If there is a problem in the evaporation process, the impact on the machine will be relatively large. , It may even damage the machine.
3. The product is a product that is allowed to evaporate, and the product that is not allowed cannot be evaporated. The effect of evaporation may be poor, or it may have some impact on the equipment, and the equipment may be damaged.

When designing Multi-effect wastewater evaporation, experimental tests are generally carried out according to the water quality. The manufacturer has more experience, knowing what kind of material needs to be processed, and knowing how to optimize the design, which can make the equipment energy-saving and stable operation .