Simple product introduction of Forced circulation evaporator factory
The Forced circulation evaporator factory will introduce to you: the forced circulation evaporator is composed of an evaporation separation chamber and a heat exchange chamber, and the external force circulation pump allows the liquid to circulate to increase the flow rate of the solution. The heating chamber has a vertical and horizontal structure, and the circulation efficiency of the liquid flow is regulated by a pump. The heating pipe can be vertical one-way two-way, horizontal one-way two-way. Due to the difference in the inlet and outlet positions of the circulating feed liquid in the separation chamber, it is divided into a positive flow forced circulation evaporator and a countercurrent forced circulation evaporator. The inlet of the circulating feed liquid at the upper part of the outlet can be called forward circulation and reverse circulation. The reverse cycle forced evaporator has more advantages: there is a high-efficiency demister on the top of the separation chamber, which is used to separate the liquid and liquid droplets entrained in the outlet steam, which can improve product quality and reduce entrainment loss.
The forced circulation evaporator relies on an external force - a circulation pump to circulate the liquid. The circulation speed can generally reach 1.5-3.5 m/s. High heat transfer efficiency and production capacity. The raw material liquid is pumped in from bottom to top by the circulation pump, and flows upward along the pipe in the heating chamber. The mixture of steam and liquid foam enters the evaporation chamber and separates, the steam is discharged from the upper part, the fluid is blocked and falls, and is sucked by the circulation pump through the conical bottom, and then enters the heating pipe to continue the circulation.
Our company is a professional Forced circulation evaporator factory, if necessary, please contact us.