What you need to know about Forced circulation evaporator
Forced circulation evaporator is used more and more in evaporative crystallization, its use occupies half of the evaporative crystallization market, its existence has changed the phenomenon of easy scaling in the multi-effect evaporation process, and brought more good news to evaporative crystallization . Today I will give you a brief introduction to Forced circulation evaporator.
The evaporator is essentially composed of a heat exchanger, a heating chamber, and an evaporation chamber. The heating chamber provides the liquid with the heat required for evaporation to promote the boiling and vaporization of the liquid, and the evaporation chamber completely separates the gas and liquid phases.
Forced circulation evaporator is that the material is transported to the tube heater through a large-flow circulation pump, and after heating, it enters the separator for evaporation and separation, and the unevaporated residual material is returned to the heater for heating and evaporation by the circulation pump again, thus forming a A system that repeatedly cycles evaporation.
Forced circulation evaporator is widely used in the evaporation and concentration of water or organic phase solution in chemical industry, light industry and other industries, especially suitable for continuous or intermittent evaporation, single-effect or multi-effect evaporation and concentration of evaporative crystallization or easy-scarring substances under atmospheric or vacuum conditions .