Vibrating fluidized bed from China manufacturer is a new type of fluidized effective drying equipment, suitable for drying granular and powdery materials. It has the advantages of convenient operation, energy saving and environmental protection. The principle of boiling drying is to use the hot air blown from the bottom of the fluidized bed to bulge and suspend the particles, and the fluidization rolls like a "boiling". The jump of the material greatly increases the evaporation surface, and the hot air flows through the suspended particles to dynamically exchange heat, take away the moisture, and achieve the purpose of drying. If vacuum boiling drying is used, the drying efficiency is higher.

Vibrating fluidized bed from China manufacturer is a closed structure, which effectively prevents contact with outside air, and the working environment is clean. It is a special purpose enhancement device, and regular cleaning can prolong its service life. The following details how to clean it properly. Cleaning method of vibrating fluidized bed;

Cleaning the external equipment of the Vibrating fluidized bed from China manufacturer is relatively simple, as long as it is cleaned and maintained regularly. To clean the aggregate in the drying tower, open the cleaning door, sweep the funnel-shaped aggregate at the bottom with a long broom, open the drain valve, and rinse the tower with tap water. In order to remove the dust in the cyclone separator, it is also necessary to open the cyclone separator, clean the aggregate with a broom, and clean it with water if necessary.
The cleaning method of Vibrating fluidized bed from China manufacturer: When cleaning the bag filter, turn on the control switch, open the cleaning door, knock on the bag filter, and finally replace the filter bag. In addition to good cleaning, working conditions need to be checked after cleaning:

The operator checks the removal. According to the "Today's Production" card and the equipment list, if the "Cleaned" card is hung up, the operator can operate.
Check whether the Vibrating fluidized bed from China manufacturer and its auxiliary equipment (dehumidification mechanism, fan, instruments, etc.) meet the requirements. Fasteners should not be loose, parts should be intact, valves and pipe joints should not leak, switch sensitivity should be normal, steam pipes should be unobstructed, and all equipment parts, containers and tools that contact materials should be clean and hygienic.