What needs to be considered when selecting Continuous disc dryer for battery materials
Factors to be considered when selecting Continuous disc dryer for battery materials:
1. The filter belt is required to have high tensile strength, tortuosity resistance, acid and alkali resistance, and temperature resistance. At the same time, the specific properties of the sludge should be considered, and a suitable weave texture should be selected to make the filter belt have a good Breathability and performance to sludge particles.
2. Continuous disc dryer for battery materials roller deflection adjustment system. It is usually done by pneumatic device.
3. The tension system of the filter belt is generally controlled by a pneumatic system. The tension of the filter belt is generally controlled at 0.3-0.7 MPa, and the commonly used value is 0.5 MPa.
4. Continuous disc dryer for battery materials belt speed control. Different types of sludge have different requirements for belt speed. That is, there is a belt speed control range for any specific sludge. Within this range, the dehydration system can not only guarantee a certain processing capacity, but also high Quality mud cakes.