NEWS
HEBEICHENGZEHUAGONGSHEBEICO.,LTD
Continuous disc dryer for battery materials structure and composition
Continuous disc dryer for battery materials is a high-efficiency and energy-saving drying equipment. The equipment mainly includes shell, frame, hollow heating plate, main shaft, rake arm and rake blade, feeder, unloading device, reducer, motor and other components.
The hollow heating disc is the main component of the Continuous disc dryer for battery materials, which is filled with saturated steam, hot water or heat transfer oil as the heating medium. Therefore, the heating plate is actually a pressure vessel. Therefore, baffle plates or short tubes are welded in a certain arrangement inside it. On the one hand, it increases the disturbance of the heating medium in the hollow disk and improves the heat transfer effect; on the other hand, it increases the rigidity of the hollow disk and improves it. Carrying capacity. Each heating plate has the inlet and outlet of the heat carrier. The heating plates of each layer are kept at a certain distance and fixed horizontally on the frame.
Continuous disc dryer for battery materials heating discs are divided into large discs and small discs and are arranged in pairs. Saturated steam, hot water or heat transfer oil is used as the heating medium inside. Therefore, the heating plate is actually a pressure vessel. Therefore, baffle plates or short tubes are welded in a certain arrangement in the interior, which improves the heat transfer effect and also improves the load-bearing capacity. Each heating plate is equipped with a cross harrow arm and fixed on the main shaft.
Hope you can use our products!
CONTACT US
E-mail: sales@hbhgsb.cn
Tel: +86-311-83756555 / 83951911
Wechat: 18031837273
Fax: +86-311-85837070
Copyright 2020 Hebei Chengze Chemical Equipment Co., Ltd 冀ICP备18023413号-1 Powered by www.300.cn