Sludge is not easy to handle, The customized Special paddle dryer for sludge dryer adopts DC vortex and AC reciprocating methods. The work efficiency is significant. However, it is easy to agglomerate due to various factors. Then how to deal with the agglomeration of the customized Special paddle dryer for sludge dryer ?

1. The traditional customized Special paddle dryer for sludge dryer drying technology is relatively simple, and the material with low difficulty is dried, and the effect is good. The sludge can be dried to achieve the desired effect. At the same time, the sludge dryer block problem must be solved. The dryer must be systematic The supply port is made of high-temperature resistant materials to make a large drying plate, which initially disperses the sludge and makes the sludge easier for the next step. The use of a large drying plate is equivalent to preheating. The sludge contacts the drying plate to absorb heat and evaporate water vapor, reducing the content Water volume

2. A variety of combined lifting and dispersing devices are welded in the customized Special paddle dryer for sludge dryer, which is more complete than the dispersing function of the traditional dryer after the transformation of the traditional dryer. The high-speed running device increases the sludge and hot air. The contact area greatly disperses the sludge. Such a professional configuration is difficult to agglomerate.

3. A cleaning device is added to the customized Special paddle dryer for sludge dryer. This modification expands the application of the dryer, and can not only dry other high-viscosity materials. In the past, the sludge stuck to the wall of the drying cylinder and adhered to the high-temperature baking. The dispersing device could not be touched, and it was difficult to clean up and headaches.

In order to ensure smooth operation, when starting the motor, make the customized special paddle dryer for sludge dryer run at no load to run smoothly without abnormal noise. With a speed control device, the speed should be adjusted within the adjustable range. When accelerating, you should slowly check whether the speed control characteristics meet the requirements.